Table of Contents
Advertisement
4.5.7
Local Control Board
Refer to
Figure 4-23
for details.
1. Unplug the connector on the IR & LED board that leads to
the Local Control board as described earlier.
2. Release the cable from its clamps/tape.
3. Release the clip on top of the unit [1] and take the unit out.
When defective, replace the whole unit.
4.5.8
LCD Panel
Refer to
Figure 4-24
for details.
1. Remove the Stand and IR/LED board [A] as earlier
described.
2. Remove the Speakers/Subwoofer [B] as earlier described.
3. Remove the PSU [C] and SSB [D] as earlier described.
4. Remove the Mains Switch [E] as earlier described.
2
F
2
4.6
Assy/Panel Removal Matisse Styling
(8000 series)
The instructions apply to the Q552.1E LA chassis
(40PFL7605H/12), but are similar for other models.
Mechanical Instructions
1
1
C
1
E
Figure 4-24 LCD Panel removal (based on 32" AL model)
back to
div. table
Q552.1L LA
1
Figure 4-23 Local Control board
5. Remove the Local Control board [F] as earlier described.
6. Remove the brackets [1].
7. Remove the clamps [2].
8. Remove the flare.
Now the LCD Panel can be lifted from the front cabinet.
1
1
B
1
1
1
1
A
4.6.1
Rear Cover
Warning: Disconnect the mains power cord before you remove
the rear cover.
Note: it is not necessary to remove the stand while removing
the rear cover.
1. Remove all screws of the rear cover.
4.
EN 19
18770_145_100216.eps
2
D
2
18970_112_100326.eps
2010-Dec-29
100217
100326
Advertisement
Table of Contents
