Read Battery Warnings
Read and follow the battery warnings and cautions on pages ii–iv and 150 of
this manual, together with any warnings and instructions supplied by the bat-
tery manufacturer.
Replacing Batteries
Before removing or inserting batteries, make sure that the camera is off. Do not open
the battery chamber cover while the power-on lamp is lit. To remove the battery,
open the battery chamber cover as described in Step 2 on the preceding page and
slide the battery out.
Alternative Power Sources
• To power the camera continuously for extended periods, use an EH-53 AC adapter
or an EH-21 AC adapter/battery charger (
for EN-EL1 batteries. Do not, under any circumstances, use another make or
model of AC adapter. Failure to observe this precaution could result in overheating
or in damage to the camera.
• The camera can also be powered by a six-volt 2 CR5
(DL245) lithium battery.
2CR5 (DL245) batteries as a back-up power source.
Insert 2CR5 batteries as shown at right.
148), which doubles as a battery charger
We recommend buying
15