Nikon COOLPIX 5400 Manual page 114

The Shooting Menu
Using a Flash
The built-in Speedlight turns off automatically at settings other than Normal. Op-
tional Speedlights mounted on the accessory shoe (
Wide adapter and Telephoto.
Use Autofocus
When shooting at settings other than Normal, use autofocus (
manual focus mode will not accurately refl ect the focus distance selected.
Slide Copy Adapter: Inverse Color
The Inverse Color option requires a bright light source. If lighting is insuffi cient, the
image in the monitor will be too bright. Should you notice excessive "noise" in the
form of randomly-spaced, bright pixels, set image sharpening to Off or Low (
Inverse Color is intended for use only when examining fi lm negatives in the monitor,
and the quality of the image produced will vary widely with the type and make of fi lm
used. We recommend using a fi lm scanner such as the Nikon COOLSCAN to obtain
high-quality digital images from negative fi lm.
Lens Adapter Rings
Remove optional lens adapter rings (
will be eclipsed in any pictures taken while a lens adapter ring is mounted on the cam-
era without a converter lens attached.
Lens
At settings other than Normal, the current lens setting
is indicated by an icon in the monitor.
102
148) can be used at settings of
148) when not in use. The corners of the frame
34). Results in
65).