Table of Contents
Advertisement
2
.3 Insert the battery
Insert a fully-charged EN-EL1 or new 2CR5 (DL245) battery as shown in
the label on the underside of the battery-chamber cover. The power-on
lamp will light briefly when the battery is inserted.
2
.4 Close the battery-chamber cover
Close the battery chamber cover (1) and slide
the latch to the closed position ( ; 2). To
prevent the battery being dislodged during
operation, be sure that the battery-cham-
ber cover is properly latched.
The Clock Battery
The camera's internal clock-calendar is powered by a separate, rechargeable
power source, which is charged as necessary when the main battery is in-
stalled or the camera powered by an AC adapter (available separately). After
charging for about ten hours, this power source can provide roughly three
days of back-up power. If the main battery has been removed for an ex-
tended period, or removed before charging is complete, a flashing
may appear in the monitor, indicating that the clock needs to be reset.
EN - EL1
2CR5
EN-EL1
2CR5 (DL245)
1
2
icon
11
Hide quick links:
Advertisement
Table of Contents
