Connecting To A Computer - Nikon D70 Manual

Connecting to a Computer

The supplied UC-E4 USB cable can be used to connect the camera to a com-
puter. Once the camera is connected, the software provided with the cam-
era can be used to copy photographs to the computer, where they can be
browsed, viewed, and retouched. The camera can also be used with Nikon
Capture 4 version 4.1 or later (available separately), which supports batch
processing and more advanced image editing options and can be used to
control the camera directly from the computer.
Before Connecting the Camera
Install the necessary software after reading the manuals and reviewing the
system requirements. To ensure that data transfer is not interrupted, be sure
the camera battery is fully charged. If in doubt, charge the battery before use
or use an EH-5 AC adapter (available separately).
Before connecting the camera, set the USB option
in the setup menu (
puter operating system and whether the camera
is being controlled using Nikon Capture 4 Camera
Control or photographs are being transferred to
the computer:
Operating system
Windows XP Home Edition
Windows XP Professional
Mac OS X
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Mac OS 9
* Pictures can be transferred using software provided with camera.
† Camera Control for D70 available with Nikon Capture 4 version 4.1 or later.
Data Transfer and Camera Control
165) according to the com-
Transfer
Choose PTP or
Mass Storage
Mass Storage
USB
*
Choose
g
Mass Stora OK e
M
P PTP
Camera Control †
Choose PTP
171