Table of Contents
Advertisement
Using the inner connector(s)
Turn the projector off by pressing
minutes to cool down. Disconnect the power cord.
1
Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)
2
Push up and remove the cover. (Illustration #2)
3
Locate the HDMI (MHL) connector beside the focus/zoom ring.
4
Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into
the HDMI (MHL) connector. (Illustration #3)
5
A micro USB cable is also available if you need to power the HDMI/MHL
dongle.
6
Replace the cover and tighten the screw(s). (Illustration #4 - #5)
5
1
(POWER). Allow the projector at least 45
2
1
4
5
45
3
Advertisement
Table of Contents
