Acer H1P1418 Series User Manual page 48

38
Alarm Volume
3D
Selects "On" to enable the 3D function supported by DLP 3D
technology.
•
3D
•
•
•
2D to 3D
•
•
If the 3D content is not displayed correctly, you can select a
3D Format 3D format that suits the 3D content you are viewing and
obtain the best result.
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
3D Sync Invert
match of left/right image sequence to get the correct image
(for DLP 3D).
24P 3D Choose 96Hz or 144Hz for 24p 3D.
Choose "On" to display the 3D warning message.
3D Warning
Message
Select this function to adjust the volume of any
warning notifications.
On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player.
Off: Turns off the 3D mode.
2D to 3D: Converts 2D contents to 3D. Note that DLP 3D
glasses are required to obtain the best 3D effect.
Mode: Provides several preset 2D to 3D conversion
modes for your selection. You can also select User and
use the "Convergence" and "Depth" functions described
below to setup your customized conversion mode.
Convergence: Changes the convergence effect that is
used when converting 2D contents to 3D.
Depth: Adjusts the image depth of 3D objects.
"Depth" and "Convergence" are only available when
"Mode" is set to "User".