Preset White Balance - Nikon D2Hs User Manual

Preset White Balance

Preset white balance is used to record and recall custom white balance set-
tings for shooting under mixed lighting or to compensate for light sources
with a strong color cast. Four options are available for setting preset white
balance:
Recording New Values with the Camera
(1) Frame a neutral gray or white object and press the shutter-release button
to measure a value for white balance (
(2) Measure white balance with the ambient light sensor (
Copying Values from Existing Photographs
(3) Copy white balance from another image on the memory card (
(4) Copy white balance from Nikon Capture 4 version 4.2.1 or later (
The camera can store up to fi ve values for preset white balance in presets
d-0 – d-4. White balance values recorded with options (1) and (2) are stored
in preset d-0. To prevent this value from being replaced the next time white
balance is measured, the value stored in d-0 can be copied to presets d-1 – d-4
for long-term storage (
and (4) are also stored in presets d-1 – d-4. A descriptive comment can be
added to any white balance preset (
d-0
Stores last val-
ue measured
for white bal-
ance (
White Balance Presets
Changes to white balance presets apply to all shooting menu banks (
fi rmation dialog will be displayed if the user attempts to change a white balance preset
created in another shooting menu bank (no warning is displayed for preset d-0).
64). White balance values copied using options (3)
62).
d-1 – d-4
58).
Store values created in Nikon Capture 4 version
4.2.1 or later (available separately;
58).
58).
Store values copied from d-0 (
64).
Store values cop-
ied from images
on memory card
(
63).
64).
63).
64).
159). A con-
57