Auto Image Rotation - Nikon D2Hs User Manual

Auto Image Rotation

The D2Hs is equipped with a built-in sensor that detects camera orientation.
Information from this sensor can be embedded in photographs as they are
taken, allowing portrait (tall) orientation photos to be rotated automatically
during playback or when the pictures are displayed in PictureProject or Nikon
Capture 4 version 4.2.1 or later.
Highlight Auto image rotation in the setup
menu ( 201) and press the multi selector to
the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
Option
Camera records whether shots are in landscape (wide) orientation, portrait
(tall) orientation with the camera rotated 90 ° clockwise, or portrait orienta-
tion with the camera rotated 90 ° counter-clockwise.
Rotate tall during playback (
displayed in portrait orientation in camera monitor.
On
(default)
Landscape (wide)
orientation
Camera orientation not recorded. PictureProject and Nikon Capture 4 ver-
sion 4.2 or later display all photographs in landscape (wide) orientation.
Off
Choose this option when taking pictures with lens pointing up or down.
* In C (continuous high speed) and C
H
tion recorded for fi rst shot applies to all images in same burst, even if camera orienta-
tion is changed during shooting.
206
Description
157), portrait orientation photos will be
Camera rotated 90 °
clockwise
(continuous low speed) modes (
L
* If Yes is selected for
Camera rotated 90 °
counter-clockwise
41), orienta-