Table of Contents
Advertisement
PowerBoost function
en
vPowerBoost function
T he PowerBoost function enables you to heat up large
P o w e r B o o s t f u n c t i o n
quantities of water faster than when using heat
setting
.
Š
The function can be used by any hotplate provided that
no other hotplates are switched on. Otherwise
will flash in the heat setting display.
Activation
Select a hotplate.
1.
Touch the
symbol.
&
2.
lights up on the display.
›
The function is activated.
If a hotplate is switched on while the PowerBoost
Note:
function is active,
and
›
display; heat setting
will then be applied
Š
automatically. The PowerBoost function will now be
deactivated.
Deactivation
Select the hotplate.
1.
Touch the
symbol.
&
2.
The
display goes out and the hotplate switches
›
back to the
Š
heat setting.
The function is deactivated.
In certain circumstances, the PowerBoost
Note:
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
14
›
will flash on the heat setting
Š
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
and
Š
lock
The hob should be turned off.
To activate: press the symbol
seconds. The indicator next to the symbol
for 10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
œ
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
‚
for approximately 4
‚
,
and the residual heat
"
‰
or
•
flash alternately in the hotplate display.
lights up
‚
for approximately
Advertisement
Table of Contents
