Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Siemens EU BJ Series Instruction Manual

*Getting to know your
appliance
Y ou can find information on the dimensions and power
G e t t i n g t o k n o w y o u r a p p l i a n c e
of the hotplates in~ Page 2
Depending on the appliance model, individual
Note: .
details and colours may differ.

The control panel

Controls
Main switch
#
Selecting a hotplate
¸
Adjustment fields
A / @
PowerBoost function
&
Timer function
0
Childproof lock
‚
Touch controls
Touching a symbol activates the associated function.
Notes
Always keep the control panel clean and dry.
■
Moisture reduces its effectiveness.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.

The hotplates

Hotplates
Simple hotplate
$
Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"

Residual heat indicator

The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
■
Display œ : Low temperature
■
Use cookware that is a suitable size

Getting to know your appliance

Indicators
Operating status
‹
Heat settings
‚ Š
-
Residual heat
• / œ
PowerBoost function
›
Timer
‹‹
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
en
9