Advertisement
W32-70 INSTALLATION INSTRUCTIONS
1
INSTALLING BACK PLATE (A)
1. Determine the exact mounting location on the wall prior to
installation. Consider where the cables are routed from the
wall in relation to the holes in the back plate.
WARNING: Improper installation can result in serious personal
injury. Make sure that the structure can support a redundant
weight factor five times the total weight of the equipment: if not,
reinforce the structure before installing the mount.
2. Using the Wall Plate (A) as a template, mark, drill and plug
wall using all fixing slots, fix the Wall Plate to the wall
ensuring that the Plate is level.
CAUTION: We recommend installation by a Qualified
Tradesperson, using masonry plugs or other reliable fixings to
ensure safe installation. Consult your builder or architect if in
doubt.
2
INSTALLING SCREEN PLATE (B)
Fix the Screen Plate (B) to the screen using the fixing screws provided for your screen: Ensure the flat side of
the plate is against the screen and the plate is centred on the fixing points.
LCD model
M401
M461
3
SCREEN POSITIONS
There are 2 positions that the Screen Plate can mount to the Wall Plate; See next page. Position B places the screen
further from the wall than Position A, allowing larger screens enough room from the wall to be able to tilt. In general
Position A (closest the wall) can be used for most screen sizes other than a tilting 65" - 70" screen. However, if more
tilt is required then Position B can be used.
www.unicol.com
www.unicol.de
Fixing
LCD model
M6 x 4
P401
M6 x 4
P461
P521
Page 3
Fixing
LCD model
M6 x 4
X461HB
M6 x 4
X461UN
M6 x 4
necinstw3270/0809
www.nec-display-solutions.com
Fixing
M6 x 4
M6 x 4
Advertisement
