Child Lock; Cancelling The Programme - Beko WMY 91443LB1 User Manual

Switching the machine to pause mode:
Press the Start / Pause button to switch the machine to pause mode. Pause symbol will flash on the
display.
Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
You can select the new programme after switching the current programme to pause mode.
C
The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary
functions. See, "Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and
"Temperature selection".
C
The loading door will not open if the water temperature in the machine is high or the water level is above the
door opening.

4.3.13 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on
the machine again, programme will resume from where it has stopped.
When the child lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be
canceled if the buttons are pressed 5 times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on
the display is over, "Child Lock Enabled" appears on the display. Release 2nd Auxiliary Function
button when this warning is displayed.
To deactivate the childproof lock:
Press and hold Auxiliary Function button 2 for 3 seconds. After the countdown as "CL 3-2-1" on
the display is over, "Child Lock Enabled" disappears from the display.

4.3.14 Cancelling the programme

The programme is cancelled when the machine is turned off and on again. Press and hold On / Off
button for 3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should
cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the
loading door since the water level in the machine is above the loading door opening, then turn the Programme
Selection knob to Pump+Spin programme and discharge the water in the machine.
Washing Machine / User's Manual
88
0 C
88:88
1888
23 / EN