Spin Speed Selection - Beko WMY 91443LB1 User Manual

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the
current programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use
Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the
machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The programme resumes. Machine spins the laundry by
discharging the water.
If you want to discharge the water at the end of the programme without spinning, use No Spin
function.
C
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes
cannot be made if the steps do not allow it.
Washing Machine / User's Manual
88
C
0
88:88
1888
88
C
0
88:88
88
C
0
88:88
19 / EN