General; Mains Connection; Important Information - Grundig Steno-Cassette 30 Manual

GENERAL

Mains connection

With the NT 683 GB power supply unit.
This mains unit can be used to operate all Grundig office
equipment. It can be connected to IT mains with a maximum line-to-
line current of 250 V.
Connect the mains cable to the alternating voltage mains
230V ~, 50Hz...60Hz.
Plug the St 3210 mains connection plug into the »ac 9V – 10 V~«
socket (at the back of the unit).
To disconnect the mains unit from the machine: depress the catch on
the connector and simultaneously pull the cord.
Repair note
Use only original replacement parts.
The mains cable must only be replaced by a specialist.

Important information

Make sure that the ventilation openings on the housing are not
blocked.
Do not expose the unit to temperatures higher than 35 °C.
Furniture surfaces are coated with various kinds of synthetic materials
or paints that contain chemical substances.
These substances, if they come into contact with the feet of the unit,
can produce a residue on the surface that is either difficult to remove
or permanent.
The accessories mentioned in this manual (the microphone ProMic
800 FX, the 536 foot control and the 541 hand control etc.) are not
included in delivery.
______________________________________________________
3