Table of Contents
Advertisement
Upgrading memory modules
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V
DDR3L 204-pin SO-DIMMs for a maximum of 8 GB memory.
NOTE: The CPU model N3000 only has one DIMM memory slot.
IMPORTANT!
• It is recommended that you replace the memory modules
• Always install DIMMs with the same CAS latency. For optimal
• Refer to http://www.asus.com for the list of compatible DIMMs.
WARNING!
• Ensure that your hands are dry before proceeding with the rest
• Before installing memory modules, use a grounded wrist strap
To install or upgrade the memory modules:
1.
Turn off your VivoMini then disconnect all cables and peripherals.
2.
Place the VivoMini on a flat stable surface, with its top side facing
down.
20
VivoMini UN Series
under professional supervision. Visit an ASUS service center for
further assistance.
compatibility, we recommend that you install memory
modules of the same version or date code (D/C) from the same
vendor. Check with the retailer to get the correct memory
modules.
You can only install 1.35 V DDR3L SO-DIMM to the VivoMini's
DIMM slots.
of the installation process.
or touch a safely grounded object or metal object to avoid
damaging them due to static electricity.
Advertisement
Table of Contents
