Setting The Display Contrast; Setting The Display Brightness; Setting The Language; Setting The Temperature Correction Of The Room Temperature Sensor - Viessmann VITOTROL 200-E Operating Instructions Manual

Adjustments

Setting the Display Contrast

Setting the Display Brightness

Setting the Language

Setting the Temperature Correction of the Room Temperature Sensor

Setting the Units

16
You can make the menu texts easier to read. To do so,
adjust the contrast of the display to suit the lighting
conditions in the room.
1. Extended menu:
2. "Settings"
3. "Contrast"
4. Set the required contrast.
Display illumination during operation
You would like to be able to read the text in the menu
better. To do this, change the brightness level.
1. Extended menu:
2. "Settings"
3. "Brightness"
4. "Operation"
5. Set the required brightness.
Display illumination with screensaver active
Select whether the display illumination should be
switched on or off while the screensaver is active.
Factory setting: The display illumination is off.
1. Extended menu:
2. "Settings"
3. "Brightness"
4. "Standby" (screensaver)
5. Select the required function.
1. Extended menu:
2. "Settings"
3. "Language"
4. Select the required language.
If the room temperature displayed on the remote control
differs from the actual room temperature, you can
use this setting to correct the display.
1. Extended menu:
2. "Settings"
3. "Temperature correction"
4. to set the temperature value.
5. OK to confirm
The remote control uses the same format for units as
the boiler, e.g. temperature display in °C or °F.
If you want to change the units:
Boiler operating instructions
Vitotrol 200-E Operating