BMW 4 CONVERTIBLE 2022 Series Owner's Manual page 292

CONTROLS
Functional requirements
▷ The mobile phone must compatibly support
the required Qi standard.
If the mobile phone does not support the Qi
standard, the mobile phone can be charged
using a special Qi-compatible charging case.
▷ Standby state is switched on.
▷ Observe the maximum dimensions of the
mobile phone.
▷ Use only protective jackets and covers up to
a maximum thickness of 0.07 in/2 mm; other‐
wise, the charging function may be impaired.
▷ The mobile phone to be charged is located in
the center of the tray.
Operation
Inserting the mobile phone
The mobile phone must not exceed the maxi‐
mum size of approximately 6.0 x 3.1 x
0.7 in/154.5 x 80 x 18 mm.
1. Open the tray cover.
2. Place the mobile phone centered in the tray
with the display facing up.
3. Close the tray cover.
Removing the mobile phone
1. Open the tray cover.
2. Remove the mobile phone.
292
Interior equipment
Online Edition for Part no. 01405A39689 - VI/21
LED displays
Color Meaning
Blue The mobile phone is charging.
The blue LED stays illuminated once
the inserted mobile phone with Qi ca‐
pability is fully charged.
Orange The mobile phone is not charging.
Temperature on the mobile phone
possibly too high or foreign object in
charging tray.
Red The mobile phone is not charging.
Contact a dealer's service center or
another qualified service center or re‐
pair shop.
Forgotten warning
General information
If the vehicle is equipped with the forgotten
warning function, a warning can be output if a
mobile phone with Qi capability was forgotten in
the wireless charging tray when leaving the vehi‐
cle.
The forgotten warning is displayed in the instru‐
ment cluster.
Activating
1. "CAR"
2. "Settings"
3. "General settings"
4. "Wireless charging tray"
5. Activate reminder.
System limits
At high temperatures on the mobile phone or in
the vehicle, the charging functions of the mobile
phone may be limited and some functions may
no longer work.