BMW 4 CONVERTIBLE 2022 Series Owner's Manual page 274

CONTROLS
Depending on the weather, the windshield and
the side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
When using the cooling mode, condensation that
will exit below the vehicle.
Maximum cooling
Principle
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
Functional requirement
The function is available at an outside tempera‐
ture above approx. 32 ℉/0 ℃ and with the drive-
ready state switched on.
Switching maximum cooling on/off
Press the button.
The LED is illuminated when maximum
cooling is switched on.
Air flows out of the air vents to the upper body
region. The air vents need to be open for this.
The air flow can be adjusted with the program
active.
AUTO program
Principle
The AUTO program cools, ventilates or heats
the car's interior automatically.
The air distribution and the temperature are con‐
trolled automatically depending on the interior
temperature and the desired temperature setting
including the selected intensity of the air flow.
Switching the AUTO program on/off
Using the button:
274
Climate control
Online Edition for Part no. 01405A39689 - VI/21
Press the button.
The LED of the button is illuminated
with the AUTO program switched on.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Automatic"
Depending on the selected settings and outside
influences, the air is directed to the windshield,
side windows, upper body, and into the floor
area.
Point the side air vents toward the side windows.
The cooling function is switched on with the
AUTO program.
At the same time, a condensation sensor con‐
trols the program so as to prevent window con‐
densation as much as possible.
The AUTO program is switched off automati‐
cally, when manual air distribution is set.
Controlling the intensity of the air
flow
With the AUTO program switched on, the inten‐
sity can be adjusted. This changes the automatic
control for the air mass.
Using the button:
Press the lower or upper side of the
button: decrease or increase intensity.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"