O-Ring Maintenance; To Remove A Worn Or Damaged O-Ring - Craftsman 580.7622 Owner's Manual

O-RING MAINTENANCE
Through the normal operation of your pressure washer,
O-Rings, which keep the connections of the hoses and
gun tight and leak-free may become worn or damaged.
Provided with your pressure washer is an O-Ring
Maintenance Kit which provides replacement O-Rings,
Rubber Washer and Quick Connect filter.
Parts in the O-Ring Kit Include:
- 2 O-Rings (pin 97837) for each end of the nozzle
extension,
1 O-Ring (p/n B2386) for the outside of the Male
Quick-Connect,
0
• 1 Water Inlet Screen (p/n 132384)for the Female
Quick-Connect,
= 2 O-Rings (pin B2264) for the ends of the high pres-
sure hose.
Note: The above two O-Rings are close in size. Please
match carefully to assure proper O-Ring usage.
. 1 Rubber Washer (pin B2385) for the inside of the
Male Quick-Connect.
1 o-ring (p!n B2688) for the connection end of the .....
rotating brush.
O-Ring
/
To remove a worn or damaged O-Ring:
o Use a small flathead screwdriver to get underneath
the O-Ring and pry it off.
]4