Samsung RT30A Series User Manual page 35

Installation
STEP 2 Flooring
STEP 3 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause
damage to the refrigerator or physical injury.
• Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
The refrigerator can be levelled using the front legs that have a special screw (leveller)
for levelling purposes. Use a fla -head screwdriver for levelling.
34 English
• The surface to install the refrigerator
must support a fully loaded refrigerator,or
approximately 90 kg.
• To protect the floo , put a large piece of
cardboard on each leg of the refrigerator.
• Once the refrigerator is in its final p sition,
do not move it unless necessary to protect the
floor. If you have to, use a thick paper or cloth
such as old carpets along the movement path.
To adjust the height of the left side:
Insert a flat-head screwdriver into the leveller
of the front left leg. Turn the leveller
clockwise to raise, or turn it counter clockwise
to lower.
To adjust the height of the right side:
Insert a flat-head screwdriver into the leveller
of the front right leg. Turn the leveller
clockwise to raise, or turn it counter clockwise
to lower.