Samsung RT30A Series User Manual page 28

Installation
Installation warnings
Before using your fridge freezer for the fi st time, please pay attention to the
following points:
• The operating voltage for your fridge freezer is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your fridge freezer may have an odour when it is operated for the first time.
This is normal and the odour will fade when your fridge freezer starts to cool.
• Before connecting your fridge freezer, ensure that the information on the data
plate (voltage and connected load) matches that of the mains electricity supply.
If in doubt, consult a qualified ele trician.
• Insert the plug into a socket with an efficient ground connection. If the socket
has no ground contact or the plug does not match, we recommend you consult a
qualified electrician for assistance.
• The appliance must be connected with a properly installed fused socket. The
power supply (AC) and voltage at the operating point must match with the
details on the name plate of the appliance (the name plate is located on the
inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded
usage.
• Place your fridge freezer where it will not be exposed to direct sunlight.
• Your fridge freezer must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and heater
cores, and at least 5 cm away from electrical ovens.
• If your fridge freezer is placed next to a deep freezer, there must be at least 2
cm between them to prevent humidity forming on the outer surface.
• Do not cover the body or top of fridge freezer with lace. This will affect the
performance of your fridge freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do not
place anything on top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all parts with a solution of warm water
and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry.
Return all parts to the fridge freezer after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable.
You can adjust the legs by turning them in either direction. This must be done
before placing food in the appliance.
• When the product is running, high temperature can be noticed on the side
panels. This situation is normal.
• In order for the product to work efficiently, there must be some gap around it
for air circulation. If you are going to place the product in a recessed area on
the wall, make sure that the gap should be 100 mm between top surface and
ceiling, 50 mm between walls and side panels.
28 English