MAINTENANCE
CHECKING THE OIL LEVEL (DAILY)
Make sure that there is sufficient oil in the oil reservoir (See page 6) and top-up
if necessary.
• Only use SAE40 compressor oil, available from your Clarke Dealer.
DRAIN THE TANK (DAILY)
When you have finished using the compressor for the day, always open the
drain valve to ensure that any condensate is drained off.
CLEANING THE AIR INTAKE FILTER (MONTHLY)
The air intake filter should be inspected on a monthly basis, and more often in
dusty conditions,
1.
Remove the filter cover from the
compressor as shown.
2. Remove the sponge filter from the
filter cover.
3. Clean the sponge and the filter
cover using a soft brush.
• If necessary, the sponge filter
may be gently washed in warm
soapy water.
• Rinse and allow the filter to dry
thoroughly before refitting.
4. Ensure that the filter and filter cover is replaced in its original position.
• If the filter is damaged, you should obtain a replacement.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Air Filter Cover
11