Table of Contents
Advertisement
OPERATING THE PRODUCT
1. Remove the blade cover.
2. Install the battery pack. Make sure that
the latches on the battery pack click into
place.
NOTE: Always close the blades when
turning off the product after use. Never
leave the product unattended while the
battery pack is inserted.
3. Press and hold the trigger switch for 3
seconds to turn on the product and open
the cutting blade. The LED indicator turns
on.
4. Press and release the trigger switch to
cut off a branch.
NOTE: Cut at an angle for a cleaner cut.
WARNING: The temperature of the product
may rise, and over-temperature protection
may be activated when cutting very dry or
hard materials. Wait for 5-10 minutes or
until the product has cooled down before
resuming.
1
2
3
4
3s
9
Operation
Advertisement
Table of Contents
