Table of Contents
Advertisement
SYMBOLS IN THIS MANUAL
Parts or accessories sold separately
Note
Warning
LED INDICATIONS
LED INDICATOR SOUND
On (green)
1 beep
Flashing (red)
Continuous
beep until
the blades
open
Off (green)
1 beep
before LED
turns off
3 flashes (red)
3 beeps
(every 2
seconds until
the product
goes into
sleep mode)
Off
2 beeps
Flashing (red)
5 beeps
STATUS
The product is on.
The product is jammed.
The cutting blades
open. Once the flashing
of the LED and the beep
tone stops, operation
may be resumed.
The product has been
inactive for 30 seconds
and is going into sleep
mode.
Over-temperature
protection is activated.
Wait for 5-10 minutes
or until the product has
cooled down before
resuming operation.
The product is off.
The product has made
2,000 cuts. Check the
quality of the blades.
5
Original Instructions
Advertisement
Table of Contents
