Lnb Settings - Grundig 24 GHB 5340 Brief Instruction

DETAILED­CHANNEL­SETTINGS
LNB­Settings
1­ Press »MENU« to open the menu.
< >
2­
Press » « or »
menu and press »OK« to confirm.
– » CHANNEL« menu is now enabled.
3­
Select »Dish Antenna Setup« using »
» « and confirm with »OK«.
Λ
– » Dish Antenna Setup« menu will be
displayed.
4­
Select the required items with »
< >
» «, » « or »OK«.
­ Satellite­
Select the satellite from which you want to
receive digital stations from the list with »
or » « and confirm with »OK«.
Λ
­ Transponder­
Press »GUIDE« to switch to the transponder
list. You can select a transponder from
the list, change or delete the current
transponder or add a new transponder.
­ LNB­Type­
Select the LNB type with »
confirm with »OK«.
Note:
Select 09750/10600 from the list if you
7
use universal LNB.
­ LNB­Power­
Select the LNB power as »Off« or as
»13/18V«, »13V«, »18V« according to the
LNB type with »
DiSEqC­1.0­
DiSEqC 1.0 switch allows for receiving from
maximum 4 satellites at the same time.
In »LNB selection«, select »LNB1«, »LNB2«,
»LNB3« or »LNB4« for the satellite that
corresponds to the relevant DiSEqC
<
positions with »
46­ ENGLISH
« to select the »CHANNEL«
V
«, »
V
« or »
V Λ
< >
« or » «.
>
« or » «.
­ DiSEqC­1.1­
DiSEqC 1.1 switch allows for receiving from
maximum sixteen satellites at the same time.
In »LNB Selection«, make selections
between »LNB1« and »LNB16« for the
satellite that corresponds to the relevant
DiSEqC position with »
« or
­ Motor­
Your television supports DiSEqC 1.2
motorized satellite systems. This feature
allows to control the satellite through your
«,
Λ
television.
In »Motor«, make the selections for the
relevant motorized satellite system selections
with »
«
V
Note:
Information about motorized satellite
7
antenna settings are given under the title
"Motorized Antenna Settings (DiSEqC
1.2)".
5­
Press »EXIT« to end setting.
« and
­----------------------------------------------------
<
« or »
< >
« or » «.
>
«.