Table of Contents
Advertisement
On-Screen Set Up
Make sure equipment is properly connected (as shown on pages
10-11) before connecting the TV to power.
First Time Setup menu
When you turn the TV on for the first time, the First Time
Setup menu will appear.
Follow the prompts using the
to select your preferences. You will be guided through:
If you make an error, you can update your preferences in
the settings menu later.
16 | ON-SCREEN SET UP
On/Standby light is RED
in standby mode.
On/Standby light is OFF
when the TV is on.
buttons
/
/
/
/ OK
2 .
4
If you are using a wired network, connect an ethernet cable to
the TV. The TV will automatically connect to the Internet.
If you are using a wireless connection, select 'Wi-Fi Network'.
The TV will scan for nearby wireless networks. Make sure that
the TV is within the range of your wireless modem/router, and
you have your Wi-Fi password handy. Select your network,
enter network password using the on-screen keyboard and
select ENTER. Press OK to connect.
Or, you can connect to the internet later by going to the User
Menu settings.
Make sure the TV is plugged in at
the power socket and switched
on. Press the
button to turn on
the TV.
Advertisement
Table of Contents
