Specifications - Toro 75969TE Operator's Manual

Riding mower
Table of Contents

Advertisement

Choke Control
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it
(Figure
5).
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades
Ignition Switch
Use this switch to start the mower engine. It has 3
positions: S
, R
, and O
TART
UN
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Neutral-Lock Position
Use the N
-
EUTRAL
LOCK
safety-interlock system to engage and to determine
the N
position.
EUTRAL
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
(Figure
.
FF
position with the

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Cutting Width
Without Deck
5).
Deflector—Up
Deflector—Down
Length
Roll Bar—Up
Roll Bar—Down
Height
Roll Bar—Up
179.1 cm (70.5 inches)
Weight
Model
75969TE
14
132 cm (52 inch) Deck
132 cm
(52 inches)
116 cm
(46 inches)
146 cm
(58 inches)
172 cm
(68 inches)
132 cm (52 inch) Deck
201 cm
(79 inches)
206 cm
(81 inches)
Roll Bar—Down
119 cm (47 inches)
Weight
583 kg (1,285 lb)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master professional 6000 series

Table of Contents