Table of Contents
Advertisement
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
To enable the IoT WiFi network and change the WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Wireless 3.
The WiFi settings for the Wireless 3 network display on the page.
5. To enable the Wireless 3 network, select the Enable Wireless 3 network check box.
By default, the Wireless 3 network is disabled.
6. To broadcast the Wireless 3 network SSID, select the Enable SSID Broadcast check
box.
By default, the broadcast is enabled.
7. To separate the single SSID for the Wireless 3 network in an SSID for the 2.4 GHz
band and another SSID for the 5 GHz band, select the Enable SSID separation for
2.4G/5GHz check box.
For each band, a Wireless 3 Network Name (SSID) field displays. The SSID for the 5
GHz band is prepended with _5G (NETGEAR_IOT_5G), but you can also type another
name.
By default, the Wireless 3 network provides a single SSID for both bands.
8. To change the Wireless 3 network name (SSID), type a new name in the Wireless 3
Network Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is NETGEAR_IOT. If you change the name, make sure to write down the new name
and keep it in a safe place.
9. To change the VLAN profile, select the VLAN Profile check box, and select a VLAN
profile from the menu.
By default, the VLAN profile is set to IoT(30) for the Wireless 3 network.
10. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Specify Network Settings
98
User Manual
Advertisement
Table of Contents
