Set Up A Guest Network With A Captive Portal - NETGEAR SXR80 User Manual

Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
11. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.

Set up a guest network with a captive portal

A captive portal is an entry to a guest network that requires guests to view a splash page
and agree to terms and conditions before using the network. When using captive portal
guest networks visitors cannot see other devices that are connected and they cannot
access the local area network (LAN).
To set up a guest network with a captive portal:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Guest Portal.
The Guest Portal Settings page displays.
5. Select the Enable Guest Portal check box.
6. Leave the Enable SSID Broadcast check box selected.
Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find
your network and connect to it. If you clear this check box, that creates a hidden
network.
7. To change the network name, type a new name in the Guest Portal Network Name
(SSID) field.
The name can be up to 32 characters long and it is case-sensitive. If you change the
name, make sure to write down the new name and keep it in a safe place.
8. To set a guest portal password, select the Password Authentication radio button
and enter the password in the field.
The password must be a minimum of 8 characters and can be a maximum of 64
characters.
Note: In order for visitors to access the Internet, they must enter this password in
the guest portal and click the AGREE button to accept terms and conditions.
Specify Network Settings 103 User Manual