NETGEAR SXR80 User Manual page 102

Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
3. Enter the Orbi admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Guest Portal.
The Guest Portal Settings page displays.
5. To enable the guest portal, select the Enable Guest Portal Network check box.
By default, the guest portal is disabled.
6. Leave the Enable SSID Broadcast check box selected.
Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find
your network and connect to it. If you clear this check box, that creates a hidden
network.
7. To change the network name, type a new name in the Guest Portal Network Name
(SSID) field.
The name can be up to 32 characters long and it is case-sensitive. If you change the
name, make sure to write down the new name and keep it in a safe place.
8. To change the VLAN profile, select the VLAN Profile check box, and select a VLAN
profile from the menu.
By default, the VLAN profile is set to Guest(40) for the guest WiFi network.
9. In the Authentication Options section, either specify an open network or set an
authentication password by doing one of the following:
• None. To specify an open network without authentication, select the None radio
button.
• Password Authentication. To set an authentication password, select the
Password Authentication radio button and specify a password in the field. The
password must be a minimum of 8 characters and can be a maximum of 64
characters.
Note: In order for visitors to access the Internet, they must enter this password
in the guest portal.
10. To set an expiration time for how long visitors can access the Internet, select a time
from the Expiration menu. After visitors are authenticated, they can access the
Internet for that period of time.
If you select Never from the menu, visitor access time is not restricted to any period.
Specify Network Settings 102 User Manual