Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lincoln Electric Manuals
  4. Motorcycle Accessories
  5. VIKING 5X4 SHADE 11
  6. Operator's manual

Lincoln Electric VIKING 5X4 SHADE 11 Operator's Manual

4.50 x5.25 standard replacement lens
Hide thumbs

Advertisement

Quick Links

Download this manual
IM10170
VIKING™ 5X4 SHADE 11 HELMET
February 2014
4.50 x 5.25 STANDARD REPLACEMENT LENS
OPERATOR'S MANUAL
Copyright © Lincoln Global Inc.
• World's Leader in Welding and Cutting Products •
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

Advertisement

loading

Related Manuals for Lincoln Electric VIKING 5X4 SHADE 11

Summary of Contents for Lincoln Electric VIKING 5X4 SHADE 11

  • Page 1 IM10170 VIKING™ 5X4 SHADE 11 HELMET February 2014 4.50 x 5.25 STANDARD REPLACEMENT LENS OPERATOR’S MANUAL Copyright © Lincoln Global Inc. • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Page SAFETY WARNINGS – READ BEFORE USING OPERATING INSTRUCTIONS HELMET CARE AND MAINTENANCE SHADE GUIDE SETTINGS AND LENS REPLACEMENT FILTER PLATE AND LENS REPLACEMENT WARRANTY INFORMATION REPLACEMENT PARTS...

  • Page 3: Safety Warnings - Read Before Using

    SAFETY WARNINGS – READ BEFORE USING WARNING ARC Rays can injure eyes and burn skin • Before welding, always inspect helmet and filter lens to be sure they are fitted properly, in good condition and not damaged. • Check to see that the clear lens is clean and securely attached to the helmet. •...

  • Page 4: Operating Instructions

    OPERATING INSTRUCTIONS Headgear Adjustment Crown Adjustment Ratchet Knob Tilt Adjustment Fore-Aft Adjustment HEAD SIZE ADJUSTMENT: HEADGEAR TIGHTNESS is adjusted by push- ing in the Ratchet Knob and turning to adjust for the desired head size. This knob is located at the back of the helmet. HEADGEAR CROWN ADJUST- MENT is made by adjusting for comfort and snapping the pin into the hole to lock securely in place.

  • Page 5: Helmet Care And Maintenance

    HELMET CARE AND MAINTENANCE • Periodic cleaning with soapy water solution or standard glass cleaner is suggested. Air dry or use soft cloth to dry. * Change or clean polycarbonate impact resistant clear lens when it becomes dirty or cloudy Storage: Store in a clean, dry location.

  • Page 6: Filter Plate And Lens Replacement

    FILTER PLATE AND LENS REPLACEMENT Replacing Front Clear Cover Lens: Replace the front cover lens if it is dam- aged. Remove ADF holder assembly per Figure 1. Remove front cover lens from helmet assembly. Carefully remove gasket from cover lens. Install new cover lens into gasket and assemble to helmet shell.

  • Page 7: Warranty Information

    WARRANTY INFORMATION WARRANTY INFORMATION: Reference IMWS1 included in Literature. SPATTER DAMAGE IS NOT COVERED BY WARRANTY: Do not use this product without the correct protective outside clear lens installed. The outside clear lens supplied with this helmet is properly sized to work with this product and substitutions from other suppliers should be avoided.
  • Page 8 • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com...