Advertisement
Quick Links
Download this manual
See also:
User Manual
USER INSTRUCTIONS
IFB 4030-M
Description
The IFB 4030-M is a passive beltpack intended for use with Telex digital matrix intercom sys-
tems.
1. Controls headset/earset output audio level.
2. ¼" Monaural headset/earset output.
3. XLR-3F Balanced input.
Installation
1. Connect the beltpack to an unused intercom system port (see cable diagram below).
2. Configure the unused intercom system port (via ADAM or Zeus Edit) for IFB.
3. Set the port output level (via |System| |Gains| |Analog Input/Ouput Gains|) to -4 dB
4. Send the changes to the intercom.
5. Connect the headset/earset to the unit.
9050-7489-001 Rev. A, 1/01
1
2
HEADSET
N.C.
4030-M Connector
XLR-3 Male
IFB 4030-M to Intercom Cable Diagram
LINES
Matrix Connector
DE-9 Female
8
1
2
7
3
3
Advertisement
Related Manuals for Telex 4030
Summary of Contents for Telex 4030
- Page 1 USER INSTRUCTIONS IFB 4030-M Description The IFB 4030-M is a passive beltpack intended for use with Telex digital matrix intercom sys- tems. 1. Controls headset/earset output audio level. 2. ¼” Monaural headset/earset output. 3. XLR-3F Balanced input. Installation 1. Connect the beltpack to an unused intercom system port (see cable diagram below).
-
Page 2: Specifications
The sole obligation of Telex during the warranty period is to provide, without charge, parts and labor necessary to remedy covered defects appearing in products returned prepaid to Telex. This...