Safety And Emc Standards - GRASS VALLEY OCP400/20 Maintenance Manual

Notices

Safety and EMC Standards

This equipment complies with the following standards:
Safety Standards
IEC62368-1:2018
Audio/video, information and communication technology equipment: part 1
EN 62368-1:2018
EU national deviations.
EMC Standards
This unit conforms to the relevant Union harmonization legislation and the requirements of
the following directive/standards:
RED 2014/53/EU
EMC testing;
Radio testing;
Radio testing;
FCC / CFR 47:Part 15 (Class A)
Federal Communications Commission Rules Part 15, Subpart B
Caution to the user that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
following the provisions of:
• the RED directive 2014/53/EU
☞
Note Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
viii
EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1 and EN 301 489-19 V2.1.1.
EN 62311:2020N
EN 303 413 v1.1.1 (GPS)
EN 300 330 v2.1.1 (NFC)