Lenovo ThinkStation PX Manual page 26

Hide thumbs Also See for ThinkStation PX:

3.5" SATA HDD Installation using the Front Access Bays

On ThinkStation PX models without Front M.2 SSD Enclosures installed

previously, the user has the option to put up to three (3) 3.5" SATA HDDs in the

front access bays. Here are some step-by-step instructions on how to install 3.5"

SATA HDDs in the front access bays.

1. Remove the Front Access 3.5" HDD Tray from any of the front access bays

that do not have front M.2 SSD enclosures installed.

Note: Some ThinkStation PX models may have the front access bay key

lock installed. If so, make sure the front access bays are unlocked.

1. First press latch to release

handle

2. Then, rotate red handle and

pull straight out

Front access bays key lock

Front access bay 1

Front access bay 2

Front access bay 3

Table of Contents