Lenovo ThinkStation PX Manual page 12

Hide thumbs Also See for ThinkStation PX:

Front M.2 drive installation

1. Remove the M.2 carrier(s) from the Front Bay assembly by pressing on the

red touchpoint to release the spring-loaded M.2 carrier from the Front Bay

assembly.

Note: Make sure the key lock is in the unlocked position or else the M.2

carrier(s) will not be able to be removed.

2. Place the M.2 carrier on a flat surface and remove the four (4) screws using

a Phillips screwdriver. Make sure the M.2 carrier bezel is pushed back into

the initial closed position.

Screws

Push M.2 carrier bezel back into the initial position

M.2 Key Lock

Press here to release M.2 carrier(s)

Table of Contents