Targus PA082U User Manual page 8

When connecting a serial device to the adapter, you must
disconnect then reconnect the adapter's USB connector in
order for the new device to work properly.
Before you can use a serial mouse with the adapter, you must
install it as an HID-compliant mouse, which your computer
will recognize as a USB mouse.
Parallel Port
Connecting and Configuring a Printer for the First Time
To connect a parallel printer:
1 Plug the printer cable into the parallel port on the
adapter.
2 Install the printer software driver according to the
instructions that come with the device.
3 When prompted to select a port, choose PB1284-1 (USB
port) . If this port does not appear in the list, choose the
LPT1 port , complete the manufacturer's setup for your
printer, and refer to the instructions below to redirect
your printer.
Checking and Redirecting the Printer Port Settings
Follow these instructions to check the printer port settings and
redirect your printer from the LPT1 port to the PB1284-1 (USB
port) on the adapter.
1 With the printer connected to the adapter's parallel port,
select Start , Settings , and then Printers .
2 Right-click the printer device you are reassigning and
select Properties .
8