Assembly; Charging The Battery - Bissell CROSSWAVE CORDLESS MAX PROFESSIONAL Manual

Assembly

Go to BISSELL.com for assembly videos.
1.
Insert handle into body
of machine until you hear a
"click".

Charging the Battery

For helpful how-to videos, check out BISSELL.com.
Make sure machine is fully charged before first use. To check the battery status, remove the machine
from the dock and turn it ON by pressing the Power Button. You'll know the battery is fully charged
when all three white status lights are illuminated.
1.
Place your CrossWave®
Cordless Max onto the 3-in-1
Docking Station to charge.
2.
Slide the Brush Roll Drying
Tray into place on the side of
the 3-in-1 Docking Station.
2.
Plug the adapter into
a suitable wall outlet. The
Battery Status light will
illuminate when charging.
4h
3.
For maximum run time,
charge the machine for 4
hours.
BISSELL.com 5