Table of Contents
Advertisement
uMove function
T his function activates the entire flexible cooking zone,
M o v e f u n c t i o n
which is divided into three cooking areas and which has
preset heat settings.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
Cooking areas
This means that an item of cookware can be moved
during the cooking process to another cooking area
with another heat setting:
Preset power settings:
Front section = power setting 9.0
Middle section = power setting 5.0
Rear section = power setting
The preset power settings can be changed
independently of one another. You can find out how to
change these in section ~ "Basic settings".
Notes
If more than one item of cookware is detected on the
■
flexible cooking zone, the function is deactivated.
If the cookware is moved within the flexible cooking
■
zone or lifted up, the hob automatically starts
searching and the heat setting of the area in which
the vessel was detected is set.
You can find information on the size and positioning
■
of the cookware in the section on ~ "Flex Zone"
Û
Activation
Select a hotplate from the flexible cooking zone.
1.
Touch menu.
2.
Select the
·
MoveMode option.
3.
The
indicator on the active cooking area lights
·
up.
This function has now been activated.
To change the heat setting:
The heat settings for the individual cooking areas can
be changed as you cook. Touch the symbol for the
cooking area you require and adjust the heat setting in
the settings area.
If the function is deactivated, the heat settings for
Note:
the three cooking areas are reset to the preset values.
Deactivating
Select the cooking area and touch the Switch off button
in the settings area. The hotplate will switch itself off and
the residual heat indicator will appear.
This function has now been deactivated.
Move function
en
17
Advertisement
Table of Contents
