Move Function; Activation; Deactivating - Bosch PXY8 Series Instruction Manual

Move function

en
uMove function
This function activates the entire flexible cooking zone
M o v e f u n c t i o n
and divides it into three flexible cooking areas. Each
cooking area has a preset power setting.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and how it is
positioned.
Cooking areas
This function allows you to change the power setting at
which your food is cooked simply by repositioning the
cookware in a different zone.
Preset power settings:
Front section = power setting 9.0
Middle section = power setting 5.0
Rear section = power setting Û
The preset power settings can be changed
independently of one another. You can find out how to
change these in section ~ "Basic settings".
Notes
If more than one item of cookware is detected on the
■
flexible cooking zone, the function will be
deactivated.
If the cookware is picked up or moved within the
■
flexible cooking zone, the hob will begin an
automatic search. The power setting for the new
area is set.
You can find information on the size and positioning
■
of the cookware in the section on ~ "Flex Zone"
14

Activation

Select one of the two cooking zones in the flexible
1.
cooking zone.
Select the MoveMode function from the cooking
2.
mode menu.
This activates the function.
Changing the power settings
The power settings for the individual cooking areas can
be changed as you cook. Set the cookware down on
the cooking area and change the power setting on the
control panel for the cooking area in question.
If the function is deactivated, the power settings
Note:
for the three cooking areas will be reset to the preset
values.

Deactivating

Select a cooking zone and touch the "Switch off" button
in the control panel. The cooking zone switches itself off
and the residual heat indicator appears.
The function is deactivated.