Removal steps of the LCD panel and hinges
Disconnect the EDP cable connector
When installing: Ensure that the connector is attached firmly.
2
Remove four screws
and then remove the LCD panel
Step
Screw (quantity)
2
M2.5 × 4mm, flat-headed, nylon-coated (4)
Remove two screws
4
and the remove the hinges in the direction shown by arrow
Step
Screw (quantity)
4
M2.5 × 4mm, flat-headed, nylon-coated (2)
1160 Integrated camera and LCD cable
For access, remove these FRUs in order:
•
"1010 External battery pack" on page 54
•
"1020 Keyboard" on page 54
•
"1030 Optical disk drive" on page 56
•
"1040 Base cover assembly" on page 57
•
"1050 Hard disk drive or solid-state hybrid drive" on page 58
•
"1060 Wireless-LAN /Bluetooth card" on page 60
•
"1080 Upper case" on page 62
All manuals and user guides at all-guides.com
1
.
a
3
.
Color
Black
Color
Black
.
Chapter 10
Removing or replacing a FRU
Torque
2.0– 2.5 kgfcm
5
.
Torque
2.0– 2.5 kgfcm
75