1160 Edp Cable And Integrated Camera - Lenovo Y520-15IKBM Hardware Maintenance Manual

Lenovo Y520-15IKBM Hardware Maintenance Manual

1160 EDP cable and integrated camera

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 35
• "1030 Solid state disk and hard disk drive" on page 36
• "1040 PCI Express Mini Card for wireless LAN" on page 38
• "1050 DIMM" on page 40
• "1060 Fan assembly" on page 41
• "1070 Heat Sink" on page 42
• "1080 Speakers" on page 44
• "1090 IO board" on page 45
• "1100 Kensington lock board and DC-in cable" on page 46
• "1110 Touchpad button board" on page 48
• "1120 System board" on page 49
• "1130 Upper case" on page 51
• "1140 LCD unit" on page 54
• "1150 LCD hinges" on page 56
Figure 16. Removal steps of EDP cable and integrated camera
Note: The integrated camera is stuck on the top center of the LCD cover.
Unplug the connector in the direction shown by arrow 1, then remove the
camera board in the direction shown by arrow 2.
2
1
When installing: Stick the integrated camera to the top center of the LCD
cover and adjust the placement of it to make sure the connector is attached
firmly.
58