Notes On Waterproof, Dustproof And Shock-Resistant Properties - Sharp AQUOS sense8 Quick Start Manual

Notes on Waterproof, Dustproof and
Shock-resistant Properties
Before using the product, thoroughly read the contents of "Notes on
Waterproof, Dustproof and Shock-resistant Properties" to ensure correct
use. Failure to follow the contents described in these sections may
cause liquid or dust to get inside, resulting in overheating, ignition,
electric shock, injury or fault.
Proper operations of the product are not guaranteed in every possible
condition. Faults determined, after an inspection, to be caused by
mishandling by the customer such as by using the product without
following the contents written on "Notes on Waterproof, Dustproof and
Shock-resistant Properties" are not covered by the warranty.
Waterproof, Dustproof and Shock-resistant
Properties of the Product
The product has a protection rating (JIS C 0920) for waterproof property
equivalent to IPX5
*3
to IP6X on the condition that the SIM card/microSD memory card tray
is securely closed (Based on the experiments by the Company). The
product also employs a shock-resistant structure passing MIL-standard
*4
testing .
*1 IPX5 means that the cell phone continues to function as a phone after being
subjected to a water jet (approximately 12.5 liters/min) discharged from a
water pouring nozzle (inner diameter: 6.3 mm), from all directions and
approximately 3 meters away from the cell phone for at least 3 minutes.
*2 IPX8 means that the cell phone continues to function as a phone after being
gently lowered into a tank filled with still tap water (at room temperature) to
the depth of 1.5 meter, immersed at the bottom for approximately 30 minutes
and then taken out of the tank.
*3 IP6X means that the cell phone securely continues to its function of no grit
and dust getting inside the main unit even after it has been placed in an
apparatus with grit and dust (diameter: 75 μ m or less) and shaken for 8
hours.
*4 MIL standard compliant
We conduct our own testing based on MIL-STD-810H (MIL-STD-810G for
shock-resistant drop testing) established by the US Department of Defense.
• Since performance of the product was confirmed based on the test
environment, proper operation of all the product in every possible
situation during actual use is not guaranteed. In addition, it does not
guarantee that there will be no damage or failure for all impacts.
*1 *2
and IPX8 , as well as dustproof property equivalent
- 34 -