Setting The Dial Mode; Setting The Flash Time; Setting The Area Code; Resetting All Settings - Motorola L702 Series User Manual

Doc Title : Product Data - User Manual
Model : Motorola L702 series
5. Press SPEAKER on the corded base or put the corded handset on the base cradle to hang up and leave the
cordless handset engaged with the caller.

3.15 Setting the dial mode

The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU/SELECT and then UP or DOWN to select SETTINGS.
2. Press MENU/SELECT and then UP or DWON to select DIAL MODE.
3. Press MENU/SELECT and then UP or DOWN to select TONE or PULSE.
4. Press MENU/SELECT to save.
NOTE
If pulse mode is selected, press */ TONE to switch from pulse to tone dialing temporarily when dialing out. After the
call is ended, the dial mode will change back to pulse.
3.16

Setting the Flash Time

The default flash time is 600ms. It is unlikely that you should need to change this setting unless advised to do so.
1. Press MENU/SELECT and then UP or DOWN to select SETTINGS.
2. Press MENU/SELECT and then UP or DWON to select FLASH TIME.
3. Press MENU/SELECT and then UP or DOWN to the flash time you want (8 options are available: 90MS, 100MS,
110MS, 250MS, 300MS, 400MS, 600MS, and 700MS.)
4. Press MENU/SELECT to save.
3.17

Setting the Area Code

1. Press MENU/SELECT and then UP or DOWN to select SETTINGS.
2. Press MENU/SELECT and then UP or DWON to select AREA CODE.
3. Press MENU/SELECT and then enter the area code.
4. Press MENU/SELECT to save.

3.18 Resetting all settings

1. Press MENU/SELECT and then UP or DOWN to select RESET.
2. Press MENU/SELECT and then UP or DWON to select ALL SETTINGS.
3. Press MENU/SELECT and then select YES or NO.
4. Press MENU/SELECT to save.
3.19

Using your answering machine

The answering machine records unanswered calls when it is activated.

3.19.1 Turning on or off the answering machine

1. Press MENU/SELECT and then UP or DOWN to select ANS. MACHINE.
2. Press MENU/SELECT and then UP or DOWN to select ANSWERER ON or ANSWERER OFF. If the
answering machine is turned on originally, ANSWERER OFF will be displayed. If the answering machine is
turned off originally, ANSWERER ON will be displayed.
3. Press MENU/SELECT to confirm.

3.19.2 Setting the answer mode

1. Press MENU/SELECT and then UP or DOWN to select ANS. MACHINE.
2. Press MENU/SELECT and then UP or DOWN to select ANSWER MODE.
3. Press MENU/SELECT and then UP or DOWN to select the announcement modes:
ANNC & REC invites your callers to leave a message.
•
ANNC ONLY lets callers hear your announcement but they cannot leave a message.
•
4. Press MENU/SELECT to save.

3.23.3 Setting the number of rings

1. Press MENU/SELECT and then UP or DOWN to select ANS. MACHINE.
2. Press MENU/SELECT and then UP or DOWN to select ANSWER DELAY.
3. Press MENU/SELECT and then UP or DOWN to select the rings to answer (4 options are available: TOLL
SAVER, 3 RINGS, 4 RINGS, and 5 RINGS).
4. Press MENU/SELECT to save.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
19 of 36