Enable Link Aggregation Configuration - Arris SURFboard SB8200 DOCSIS User Manual

Chapter 5: Monitoring your cable modem and protecting your connected network
View the Cable Modem Configuration Settings
The SB8200 Cable Modem Configuration screen displays the downstream and upstream
connection to the network. When your SB8200 successfully connects to the network, it
stores the connection frequency to automatically connect whenever you have to log in to
your SB8200.
To open the Configuration screen:
SB8200 event log screen
4. Open the SB8200 Web Manager (see
5. Click the Configuration menu tab or link on the SB8200 Web Manager screen.
Note: The configuration settings on the SB8200 Configuration screen are read-only
and cannot be modified. You will have to contact your service provider to obtain
special authorization to change the cable modem frequencies and other
configuration settings on your SB8200.
SB8200 configuration screen

Enable Link Aggregation Configuration

Ethernet Link Aggregation applies to various methods of combining (aggregating) multiple
network connections in parallel in order to increase throughput beyond what a single
connection could sustain, and to provide redundancy in case one of the links should fail.
To enable the Link Aggregation Configuration on your SB8200:
1. On your SB8200 Web Manager screen, click ADVANCED menu option.
SURFboard ® SB8200 DOCSIS ® 3.1 Cable Modem User Guide DRAFT Revision x.5
Start the SB8200 Web Manager (page 15)).
23