Download Print this page

Advertisement

Quick Links

IMPORTANT INFORMATION
Always disconnect the Polaris from the pool wall when cleaning or backwashing the pool
filter.
After cleaning or backwashing, let the filtration system run for at least five minutes before
re-connecting the Polaris.
New plumbing lines should be flushed out before installing the Polaris.
The Polaris should not be used to remove plaster dust in new pools.
Always remove the Polaris
Except when checking the wheel RPM, do not handle the Polaris while it is operating.
Always remove the Polaris from the pool before chemical shock treatments.
This one year limited warranty is extended to the original consumer purchaser of this Polaris
Vac-Sweep 280 Automatic Pool Cleaner manufactured by Polaris Pool Systems, Inc., from date
of manufacture of the unit as established by the serial number, or one year from date of purchase
with proof of purchase, whichever is later. Polaris warrants this product, including all parts and
components thereof, to be free of defects in material and workmanship. Normal replacement items
such as bags, tires, sweep hoses or sweep hose scrubbers which have been worn out by use or
improper installation are not covered by this warranty. The Polaris 280 frame is warranted for a
period of five years.
This limited warranty does not apply if the failure is caused or contributed to by any of
the following: improper handling, improper usage, improper storage, winter freezing, abuse,
improper installation, removal of the in-line filter screen, unsuitable application of the unit,
improper maintenance, lack of reasonable and necessary maintenance, damage in transit or
during installation, or damage from repairs/alterations made or attempted by anyone other than
Polaris or one of its Authorized Service Centers. In no event shall Polaris be liable for incidental or
consequential damages of any nature or for damages to persons or property, including damage to
vinyl liners, plaster, tile, aggregate-based and other pool surfaces, or damages resulting from the
use of this product with a substandard pool circulation system or chemical imbalance.
Authorization to return a unit or part to the plant of manufacture must be obtained from the
Polaris Customer Service Department. Check with your dealer for the local procedure before
exercising this warranty. If further directions or instructions should be required, contact the
Customer Service Department at 1-800-VAC-SWEEP (USA and Canada only) or (760) 599-9600.
Be sure to insure the shipment against loss or damage in transit.
This limited warranty is valid only in the United States of America, Canada and Australia, and
it does not apply to Polaris Vac-Sweep 280 Automatic Swimming Pool Cleaners sold or installed in
any other country. Polaris Vac-Sweep 280 Automatic Pool Cleaners sold in the United Kingdom are
warranted for a period of two years from date of invoicing to the first user.
POLARIS 280
Code
W7220000
W7220000P
W7220005
before swimmers enter the pool.
Polaris Vac-Sweep® 280 Limited Warranty
Description
Polaris Vac-Sweep® 280
Polaris Vac-Sweep® 280, PosiTrax®
Polaris Vac-Sweep® 280, TankTrax®
1 Year Warranty

Advertisement

loading

Summary of Contents for Polaris PosiTrax

  • Page 1 Polaris or one of its Authorized Service Centers. In no event shall Polaris be liable for incidental or consequential damages of any nature or for damages to persons or property, including damage to vinyl liners, plaster, tile, aggregate-based and other pool surfaces, or damages resulting from the use of this product with a substandard pool circulation system or chemical imbalance.
  • Page 2 Polaris is not responsible for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.
  • Page 3: Quick Installation Instructions

    QUICK INSTALLATION INSTRUCTIONS Four quick steps to install and get maximum performance from the Polaris 280: • Install the Universal Wall Fitting (UWF) with Quick Disconnect • Adjust feed hose to fit pool length • Assemble the cleaner • Check for proper wheel RPM (revolutions per minute) 1.
  • Page 4 Float Check for Proper RPM Before operating the Polaris, check for proper wheel revolutions per minute (RPM). For maximum efficiency, the Polaris should operate between 28 and 32 RPM. Mark the single-wheel side tire. Turn pump on, hold cleaner below water level and count wheel revolutions for 1 minute.
  • Page 5: Routine Maintenance

    The climbing ability of the Polaris depends on the pool’s shape and water pressure or flow. The Polaris climbs best in pools without sharp angles or curves in the transition from the pool floor to the pool wall.
  • Page 6: Troubleshooting

    TROUBLESHOOTING If the Polaris cleaner displays the following actions, adjustments may be necessary to restore performance. Refer to exploded parts diagram for part references. If the Polaris cleaner displays the following actions, adjustments may be necessary to restore performance. Refer to exploded parts diagram for part references.
  • Page 7 1. Remeasure the hose to verify that it is adjusted to the proper length for the pool shape. 2. With the Polaris operating, check that the swivels in the hose and the hose connections turn freely. 3. Make sure feed hose is floating.
  • Page 8: Troubleshooting Worksheet

    Troubleshooting Worksheet If these solutions do not result in improved performance, contact the Polaris dealer who sold you the cleaner or call Customer Service. In order to provide faster and more convenient service, please have the following information available at the time of your call or when taking the Polaris in for service.

This manual is also suitable for:

Vac-sweep 280TanktraxW7220000W7220000pW7220005