Polaris 280 Owner's Manual
  1. Manuals
  2. Brands
  3. Polaris Manuals
  4. Vacuum Cleaner
  5. Vac-Sweep 280
  6. Owner's manual

Polaris 280 Owner's Manual

Hide thumbs Also See for 280:

Advertisement

Table of Contents

See also: Owner's Manual
I M P O R TA N T I N F O R M AT I O N
SERIAL NUMBER

Advertisement

Table of Contents
loading

Related Manuals for Polaris 280

Summary of Contents for Polaris 280

  • Page 1 I M P O R TA N T I N F O R M AT I O N SERIAL NUMBER...
  • Page 2 (760) 599-9600. Be sure to insure the shipment against loss or damage in transit. This limited warranty is valid only in the United States of America, Canada and Australia, and it does not apply to Polaris Vac-Sweep 280 Automatic Swimming Pool Cleaners sold or installed in any other country. Polaris Vac-Sweep 280 Automatic Pool Cleaners sold in the United Kingdom are warranted for a period of two years from date of invoicing to the first user.

  • Page 3: Product View

    They may have an adverse effect on the operation of your Polaris or may even damage it. For best results, the Polaris 280 should be installed by a pool professional. For those with experience and confidence in handling plumbing and mechanical equipment, installation is outlined in this manual.

  • Page 4: Quick Installation Instructions

    Quick Installation Instructions Four quick steps to install and get maximum performance from the Polaris 280: • Install the Universal Wall Fitting (UWF) with Quick Disconnect • Adjust feed hose to fit pool length • Assemble the cleaner • Check for proper wheel RPM (revolutions per minute) Install the Universal Wall Fitting Installs in minutes on pools with a dedicated cleaner return line and a threaded 1-1/2”...
  • Page 5 Check for Proper RPM Before operating the Polaris, check for proper wheel revolutions per minute (RPM). For maximum efficiency, the Polaris should operate between 28 and 32 RPM. 1. Mark the single-wheel side tire.

  • Page 6: Fine Tuning

    Storage and Winterizing Never store the Polaris in direct sunlight. When storing for the winter, drain out all the water (freeze damage is not covered under the warranty). Remove the UWF from the pool wall by attaching the Quick Disconnect and using pulling pressure to unscrew. In some cases, it may be necessary to use the UWF Removal Tool (part #10-102-00) available from an authorized Polaris dealer.

  • Page 7: Exploded Parts Diagram

    Number Pool Wall 47 48 10-foot Hose 10-foot Hose 51 52 10-foot Leader Hose To The Polaris No. Part # Description Qty No. Part # Description Qty No. Part # Description All-Purpose Zippered Bag* 21 C6 Wheel, Large (No Bearings Incl.) 3...
  • Page 8 Serial Number Pool Wall 45 46 10-foot Hose 10-foot Hose 10-foot Leader Hose To The Polaris No. Part # Description Qty No. Part # Description Qty No. Part # Description All-Purpose Zippered Bag* 20 C10 Tire, MaxTrax ®...

  • Page 9: Troubleshooting

    Troubleshooting If the Polaris cleaner displays the following 3. Verify the back-up valve is actions, adjustments may be necessary to cycling. Hold the valve out of restore performance. Refer to exploded the water and watch the jet. parts diagram for part references.

  • Page 10: Troubleshooting Worksheet

    If these solutions do not result in the adjustment screw. improved performance, contact the 2. Replace the sweep hose Polaris dealer who sold you the cleaner scrubber if it is worn or call Customer Service. or missing. 3. Add a sweep hose weight...
  • Page 12 EC DECLARATION OF CONFORMITY Manufacturer The Products are manufactured and marked with Polaris Pool Systems, Inc. ("Polaris") 2620 Commerce Way Vista, CA 92081-8438 USA Telephone: 760-599-9600 Facsimile: 760-597-1239 E-mail: polaris@polarispool.com Products The Products Declared herein are: Polaris Vac-Sweep ® Directives...
  • Page 14 © 2006 Polaris Pools Systems, Inc. All rights reserved. TL-200 6/06...

Table of Contents