Table Of Contents; Symbols - Dolmar LT-246.4 Instruction Manual

English
Thank you very much for purchasing the DOLMAR Outdoor Power Equipment.
We are pleased to recommend to you the DOLMAR product which is the result
of a long development program and many years of knowledge and experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your DOLMAR product.

SYMBOLS

You will note the following symbols when reading the instructions manual.
Read instruction manual and follow the
warnings and safety precautions!
Take Particular care and attention!
Forbidden!
Keep distance!
Flying object hazard!
No smoking!
No open flame!
Protective gloves must be worn!
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
Keep the area of operation clear of all
persons and pets!
(Original instructions)

Table of Contents

Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................6
Designation of parts.......................................................7
Mounting of handle ........................................................8
Mounting of protector.....................................................8
Mounting of nylon cutting head......................................8
Before start of operation ................................................9
Points in operation and how to stop ............................ 11
The nylon cutting head ................................................12
Servicing instructions...................................................14
Storage ........................................................................17
Wear protective helmet, eye and ear
protection.
Top permissible tool speed
Fuel (Gasoline)
Engine-manual start
Emergency stop
First Aid
ON/START
OFF/STOP
Never use metal blades
2
Page