Table of Contents
Advertisement
TEW-212APBO Quick Installation Guide
In this page, at least two essential pieces of information are required:
Access Point SSID (Service Set Identifier) is a case-sensitive identification
parameter for your radio network.
Default Channel for BSS - It can be set up by selecting a fixed channel
from the pull-down menu.
Hint: Use the site survey utility in System Tools to verify a fixed channel selection.
This utility will help you view the unused channels, or to check signal strength of the
other Access points on the selected channel. It is recommended that you should select
an unused channel or one where the signal strength from the other APs is weak.
For channel domain, owing to different regions regulation, each has relative channels
rule. Please refer to the table below for the correct domain and region selection.
Domain
FCC
ETSI
Spain
France
MKK
MKK1
Wireless Settings page
Regions
N. America
Europe CE
Spain
France
Japan
Japan
15
Operation Frequency/Channels
2.412~2.462 GHz (11 channels)
2.412~2.472 GHz (13 channels)
2.457~2.462 GHz (2 channels)
2.457~2.472 GHz (4 channels)
2.473~2.484 GHz (1 channel)
2.412~2.472 GHz (13 channels)
Advertisement
Table of Contents
