Panasonic CF-25LJF8EAM/E Operating Instructions Manual page 25

Hardware Expansion
A d d i n g M e m o r y
RAM module specifications
144 pins, 60/70 ns, 3.3 V
SO-DIMM, EDO
1
2
1
2
2 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
C A U T I O N
RAM modules are extremely sensitive to static electricity. There are cases where static
electricity generated by the human body has adversely affected such modules. In addition,
it is easy to damage the RAM modules or internal components of the computer. Therefore,
when installing or removing a RAM module, handle the module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
C A U T I O N
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
2
Loosen the screw, and then take off the cover
Turn your computer over. Then, loosen the screw with a screwdriver and remove the
cover.
C A U T I O N
Do not touch the terminals or internal components, insert objects other than the
module, or allow foreign particles to enter. Doing so has been known to cause
damage, fire or electric shock.
3
Installing the RAM module
Slide in the module at an angle.
1
Snap the module into place by pushing down on it.
2
Hooks
Removing the RAM module
Open the left and right hooks.
1
Gently remove the RAM module from the slot.
2
4
Put the cover back into place and then fasten the screw
( page 10)